Free timber volume calculator

Work out the volume of round logs and sawn timber in cubic metres (CBM), cubic feet (CFT) and Hoppus. Add as many logs as you like and get the total. It runs in your browser and nothing is saved or sent.

Rows
# Length (m) Mid girth (cm) True CBM True CFT Hoppus CBM
Total (0 logs) 0.000 0.0 0.000

True volume (Huber) = girth² × length ÷ 125,660. Hoppus = (girth ÷ 4)² × length ÷ 10,000 (girth in cm, length in m). Hoppus is always 21.5% lower than true volume.

Check your contract for which convention applies. See Hoppus vs true volume, the quarter girth formula and Huber's formula. Need a printable sheet? Use the free tally sheet.

Frequently asked questions

How do I calculate the volume of a round log?

Measure the girth at the middle of the log (or its mid diameter) and the length. True volume in cubic metres = girth in cm squared x length in metres / 125,660. The calculator does this for every row and adds the total.

What is the difference between true (Huber) and Hoppus volume?

Hoppus uses a quarter of the girth, squared, so it always reads 21.5% lower than true volume for the same log. Multiply Hoppus by 1.2732 to get true volume. Check which convention your contract uses.

How do I calculate the volume of sawn timber?

Multiply thickness x width x length x number of pieces, with all sizes in metres, to get cubic metres. Multiply by 35.315 for cubic feet.

How many cubic feet are in a cubic metre?

One cubic metre is 35.315 cubic feet.

Tallying hundreds of logs a day?

LumberLinq lets your staff tally on a phone, even offline. It calculates CBM and CFT for every log, keeps the raw measurements, and carries the totals into stock, the packing list and the invoice.