Sawmill software that shows what every log became
Receive logs by lot, run them through the mill, and see the outturn per run and per lot. Sawn stock, off-cuts and dispatch stay on one record.
Free plan to start. No credit card needed. Web, Android and iPhone.
In short
Sawmill software records the logs that go into the mill, the sawn timber that comes out and the outturn between them. LumberLinq keeps every log tied to its lot and supplier, records each mill run with its input and output, shows the outturn per run, and puts the sawn timber into stock by size, ready to sell or ship.
What it costs
Seedling
Free
1 user, 10 tally sheets a month
Tree
$49 a month or ₹2,499 a month
5 users, 200 tally sheets a month
Forest
$85 a month or ₹4,499 a month
10 users, unlimited tally sheets
Mill runs start on the Forest plan ($85 a month or ₹4,499 a month). Stock by lot starts on the Tree plan ($49 a month or ₹2,499 a month). The free plan covers tally sheets, Excel import, AI import of a photographed tally and basic reports, not mill runs.
No setup fee. Cancel anytime. Full plans and limits
What a sawmill needs to track
If the mill cannot show what went in, what came out and what was left, a weak lot is found at the end of the month instead of the same day.
Logs in by lot
Tally logs on arrival. Each log stays tied to its lot, its supplier and its measured volume.
Mill runs
Record the logs going in and the sawn timber coming out for each run, with the outturn.
Outturn per run and per lot
See the recovery percentage for every run and every lot, so a poor lot shows up while you can still ask why.
Sawn stock by size
Output lands in stock by size and lot, ready to sell, hold for a buyer or load.
Operators on the phone
Mill operators see their own tasks on the phone, and the app works offline at the mill.
Reconcile
Compare what was bought and tallied with what the mill measured, and see the difference.
Off-cuts, as an add-on
Record small leftover pieces from sawing as a rough total, then measure them exactly at container loading. Works together with the mill module.
How a sawmill runs on LumberLinq
- 1
Receive
Tally the logs. They become stock in a lot at a site.
- 2
Saw
Create a mill run from the lot and record the output as it is sawn.
- 3
Measure the outturn
See sawn volume against log volume for the run and for the lot.
- 4
Sell or ship
Sawn stock is available by size to hold, load into a container or dispatch.
Who uses it
Sawmills
Raw stock, mill output and finished stock together, with the outturn for every run.
Plywood and veneer mills
Know what each log lot yielded before the next one is bought.
Mill managers
Operator tasks and run results without chasing paper.
Owners who buy logs by lot
See which suppliers' lots give the best outturn.
Frequently asked questions
What is sawmill software? +
Software that records the logs coming in, what the mill produced from them, and what is left in stock, so you know the outturn for each lot and each run. LumberLinq also keeps the tally behind every figure.
How is outturn worked out? +
Outturn is the sawn volume divided by the log volume that went in, as a percentage. LumberLinq records both sides for each mill run, so the percentage is shown per run and per lot. Our guide to sawmill recovery explains why it varies.
Is the mill module on the free plan? +
No. Mill runs start on the Forest plan ($85 a month or ₹4,499 a month). Stock by lot starts on the Tree plan ($49 a month or ₹2,499 a month). The free plan covers tally sheets, Excel import, AI import of a photographed tally and basic reports.
Can I record off-cuts? +
Yes, with the Off-cuts module, an add-on at $15 a month or ₹799 a month. It records small leftover pieces from sawing as a rough total, then measures them exactly at container loading. It works together with the mill module.
Can my mill operators use it on a phone? +
Yes. Operators see their own tasks on the phone, and the Android and iPhone apps work offline and sync when the signal returns.
How much does it cost? +
There is a free plan with no credit card needed. Tree is $49 a month or ₹2,499 a month. Forest is $85 a month or ₹4,499 a month. There is no setup fee, and you can cancel at any time.
Ready to simplify your
timber operations?
Join timber businesses worldwide using LumberLinq to track every log, manage every shipment, and export every report — all in one place.