Sawn timber is the easier half of timber measuring: boards, planks and beams have square edges, so volume is simple multiplication. The mistakes come from units, from nominal against actual sizes, and from adding up many different sizes.
This guide gives the formula, worked examples in metric and imperial, a ready table, and how to convert to CFT and board feet. If you have logs rather than boards, see Huber’s formula and the quarter girth guide. For a quick answer, use the free timber volume calculator.
The formula
Volume (m³) = thickness (m) × width (m) × length (m) × pieces
When sizes are given in millimetres, divide thickness and width by 1,000 first:
CBM = thickness (mm) ÷ 1,000 × width (mm) ÷ 1,000 × length (m) × pieces
Worked example 1: millimetres and metres
100 pieces of 50 mm x 100 mm, each 3 m long.
- One piece: 0.05 x 0.10 x 3 = 0.015 m³
- 100 pieces: 0.015 x 100 = 1.5 m³
- In cubic feet: 1.5 x 35.315 = 53.0 CFT
Worked example 2: inches and feet
50 pieces of 2 in x 6 in, each 12 ft long.
- One piece in cubic feet: 2 x 6 x 12 ÷ 144 = 1.0 CFT
- 50 pieces: 50 CFT
- In cubic metres: 50 ÷ 35.315 = 1.416 m³
- In board feet: each piece is 2 x 6 x 12 ÷ 12 = 12 board feet, so 600 board feet
Ready table: common sizes at 3 m long
| Size (mm) | Volume per piece (m³) | Pieces per m³ | CFT per piece |
|---|---|---|---|
| 25 x 150 | 0.0113 | 89 | 0.40 |
| 38 x 89 | 0.0101 | 99 | 0.36 |
| 50 x 100 | 0.0150 | 67 | 0.53 |
| 50 x 150 | 0.0225 | 44 | 0.79 |
| 75 x 150 | 0.0338 | 30 | 1.19 |
| 100 x 100 | 0.0300 | 33 | 1.06 |
| 100 x 200 | 0.0600 | 17 | 2.12 |
For another length, scale in proportion. A 6 m piece of the same size has twice the volume.
Conversions you will need
| From | To | Multiply by |
|---|---|---|
| CBM | CFT | 35.315 |
| CFT | CBM | 0.02832 |
| CBM | Board feet | about 424 |
| Board feet | CBM | about 0.00236 |
A board foot is 144 cubic inches (1 inch x 12 inches x 12 inches), which is one twelfth of a cubic foot.
Mixed sizes and lots
Calculate each size on its own line, then add the lines. Do not average thicknesses or widths. A packing list should show size, length, pieces and volume per line, with a total at the bottom, so any line can be checked on its own.
Nominal against actual size
Many sawn sizes are sold by a nominal name, but the real board is smaller. Rough-sawn, kiln-dried and planed boards also differ. Before you quote or invoice, agree in writing:
- whether volume is calculated on nominal or actual size
- whether the sizes are rough-sawn or planed
- the length tolerance and how short pieces are counted
Common mistakes
- Mixing units. Thickness in mm with length in feet gives nonsense. Convert first.
- Forgetting to divide by 1,000. A 50 x 100 mm board is 0.05 x 0.10 m, not 50 x 100.
- Using nominal sizes for actual volume. The total can be several percent too high.
- Counting pieces by stack height. Count pieces or measure by lot.
- Retyping. Totals copied between files drift. Calculate from the measurements.
Keeping sizes and volume in one record
Whatever the method, the sizes and piece counts behind a total should stay on file. LumberLinq records sawn timber by thickness, width, length and pieces on the phone, calculates CBM and CFT, and carries the figures into stock, the packing list and the invoice, so nothing is retyped. Start free or request a demo.
Related: Free timber volume calculator · Timber tally sheet format and free template · Container loading calculation for timber