Teak is bought by volume, but the volume depends on how the logs were measured. Two quotes for identical logs can look 27% apart because one is on Hoppus and the other on true volume, and a price per CFT and a price per CBM are not comparable until they are converted.
This guide shows how a teak log is measured, how to move between the price units, and how to compare quotes properly. We do not quote market prices here, because they move with grade, origin and season. Use the method with your own figures.
Step 1: measure the log
For each log record:
- Mid girth in cm, over bark unless agreed otherwise.
- Length in metres, to the end of the sound wood.
- Grade or class as agreed with the buyer. Price differs by grade, so keep it on the same line as the volume.
Step 2: calculate the volume the way the contract says
True volume (Huber):
CBM = girth (cm)² × length (m) ÷ 125,660
Hoppus (quarter girth), common in the Indian and Myanmar teak trade:
CBM = (girth (cm) ÷ 4)² × length (m) ÷ 10,000
A teak log with a girth of 150 cm and a length of 4 m:
- True volume: 0.716 CBM (25.3 CFT)
- Hoppus volume: 0.563 CBM (19.9 Hoppus CFT)
The Hoppus figure is always 78.54% of the true figure. The reasoning is in Hoppus vs true volume, and the formula step by step is in the quarter girth guide.
Step 3: put every quote in the same price unit
Teak prices are quoted in several units. These are the conversions:
| From | To | Multiply by |
|---|---|---|
| Price per CFT | Price per CBM | 35.315 |
| Price per CBM | Price per CFT | 0.02832 |
| Price per Hoppus CBM | Price per true CBM | 0.7854 |
| Price per true CBM | Price per Hoppus CBM | 1.2732 |
A Hoppus ton is conventionally 50 Hoppus cubic feet, which is about 1.416 m³ of Hoppus volume. If a quote is per Hoppus ton, convert it to a per-CBM price first by dividing by 1.416.
For example, USD 20 per CFT is 20 × 35.315 = USD 706 per CBM.
Worked example: the same logs, two conventions
Take the 150 cm girth, 4 m log above and an assumed price of USD 500 per CBM (an illustration, not a market price).
| Basis | Volume | Value |
|---|---|---|
| Priced per true CBM | 0.716 CBM | USD 358 |
| Priced per Hoppus CBM | 0.563 CBM | USD 281 |
If both are quoted at “USD 500 per CBM”, the Hoppus buyer pays USD 77 less for the same log, about 21.5% less. The seller who quotes on Hoppus has to charge about 27% more per CBM (USD 637 instead of USD 500) to receive the same money as a true volume seller.
So never compare two teak quotes until you have asked three things:
- Which formula was used for the volume?
- Over or under bark?
- Is the price per CBM, per CFT or per Hoppus ton?
What also moves the price
Volume convention and unit are the arithmetic. These move the price itself, and should be written next to the volume on the tally:
- Grade, straightness and defects.
- Girth class: larger logs normally price higher per CBM.
- Origin and whether the wood is certified.
- Moisture and whether the log is freshly cut.
- Terms: ex-yard, FOB or CIF.
Weight and the container
Teak is dense, around 650 to 750 kg per cubic metre when dry, so a container usually reaches its weight limit before it looks full. Check the load against the payload, not only the volume. The method is in container loading calculation for timber.
Keep volume, grade and price on one record
Most disputes come from a total that cannot be traced back. LumberLinq keeps each log’s girth, length and grade on the tally, calculates CBM and CFT, and carries the same figures into stock, the packing list and the invoice, so the volume convention and price unit are the same on every document. Start free or request a demo.
Planning figures only. Densities, volumes and prices vary by origin, moisture and grade. Agree the formula, bark rule and price unit in writing.
Related: Free timber volume calculator · Quarter girth formula and tables · Hoppus vs true volume · Documents needed for a timber export shipment