Guides

CBM to Board Feet and CFT: Conversion Table, Formulas and Examples

1 CBM is 35.315 CFT and about 424 board feet. Conversion table, the formulas both ways, worked examples and the nominal-size trap that makes board feet differ from true volume.

Punj Shah

Timber is sold in cubic metres in most of the world, in cubic feet in parts of South Asia and in board feet in North America. If a buyer quotes one and your tally is in another, one multiplication fixes it. This page gives the factors, a table, the formulas both ways and the one trap that makes the numbers disagree. Keeping one set of factors is what lets a yard move from saw-line to shipping-line without a spreadsheet.

The three conversion factors

FromToMultiply by
CBM (m³)CFT (cubic feet)35.315
CBM (m³)Board feet (BF)423.78 (about 424)
CFTCBM0.02832
CFTBoard feet12
Board feetCBM0.002360
Board feetCFT0.08333 (1/12)

They all follow from one fact: a board foot is 1 inch by 12 inches by 12 inches, or 144 cubic inches, which is exactly one twelfth of a cubic foot. A cubic metre is 35.315 cubic feet, so it is 35.315 × 12 = 423.78 board feet.

Quick table

CBMCFTBoard feet
135.3424
5176.62,119
10353.24,238
25882.910,595
501,765.821,189

A quick way to check any figure: board feet are about 12 times the CFT, and CFT is about 35 times the CBM.

Going the other way

  • CFT to CBM: divide by 35.315. 1,000 CFT is 28.3 CBM.
  • Board feet to CBM: divide by 424. 1,000 board feet (written 1 MBF in the lumber trade) is about 2.36 CBM.
  • Board feet to CFT: divide by 12. 600 BF is 50 CFT.

Worked example: a metric plank

A sawn plank 50 mm thick, 100 mm wide and 3 m long:

  1. Volume in CBM: 0.05 × 0.1 × 3 = 0.015 CBM
  2. In CFT: 0.015 × 35.315 = 0.53 CFT
  3. In board feet: 0.015 × 423.78 = 6.36 BF

Check: 6.36 ÷ 12 = 0.53 CFT. The two agree.

Worked example: a container load

A 20ft container of sawn timber holds up to about 25 CBM (see how much timber fits in a container). That is:

  • 25 × 35.315 = 883 CFT
  • 25 × 423.78 = 10,595 board feet

If the buyer’s contract is in board feet, the tally must still be measured in your own unit first and converted once, at the end, not piece by piece.

Converting a price

Prices convert the opposite way to volumes, because a bigger unit costs more.

  • Price per CBM to price per CFT: divide by 35.315. USD 450 per CBM is USD 12.74 per CFT.
  • Price per CBM to price per board foot: divide by 423.78. USD 450 per CBM is USD 1.06 per BF.
  • Price per CFT to price per CBM: multiply by 35.315. See teak price per CBM for a full example.

Always make sure both prices use the same volume convention before converting, for example true volume or Hoppus (see Hoppus vs true volume).

The nominal size trap

This is why a board foot count and a CBM figure often do not match exactly.

Board feet are normally counted on the nominal size, the name of the board, not what you measure with a tape. A board sold as 2 inch by 6 inch is really about 1.5 by 5.5 inches after planing. For a 12 ft piece:

  • Nominal board feet: 2 × 6 × 12 ÷ 12 = 12 BF
  • True board feet: 1.5 × 5.5 × 12 ÷ 12 = 8.25 BF

So a metric tally built from real measurements converts to fewer board feet than the nominal count a North American buyer expects. Agree in the contract which one applies, and record the actual dimensions on the tally so the number can be defended.

Rough-sawn timber and most export sawn timber is sold on actual measured dimensions, so for those the factor of 424 works directly.

Logs are different

The factors above are for sawn timber, measured as thickness × width × length. Round logs are measured with a formula such as Huber’s formula for CBM. North American log rules such as Doyle and Scribner estimate how much lumber a log should yield, and they do not give the log’s true volume, so converting them with 424 will not give you a reliable CBM. See how to calculate the volume of sawn timber and the timber trade glossary for each unit.

Do it without a calculator

The free timber volume calculator works out CBM and CFT for logs and sawn timber. If you tally more than one container a month, LumberLinq keeps CBM and CFT side by side on every line, so the buyer’s unit is always there and nobody converts by hand.

Frequently asked questions

How many board feet are in 1 CBM? About 424 (423.78).

How many cubic feet are in 1 CBM? 35.315.

How many board feet are in 1 cubic foot? 12.

Why do board feet and CBM not match exactly? Board feet use nominal sizes. Measure real dimensions, and agree in the contract which one counts.

Does the factor work for logs? Not for Doyle or Scribner scaled logs. Use it for sawn timber.

CBM to board feetCBM to CFTboard foottimber volume conversioncubic metre to cubic feetlumber measurement

Ready to simplify your timber ops?

Start free - no credit card required.